Convert Microgauss to Maxwell using the exact conversion factor. This page provides the formula, reference values, and practical context for engineering, technical calculations, and professional measurement use.
Microgauss (µG) = Maxwell per Square Centimeter (Mx/cm²) × 1.000000e-6
To convert Microgauss (µG) to Maxwell per Square Centimeter (Mx/cm²), multiply the value by 1.000000e-6. The conversion factor is based on standardized unit definitions and is suitable for engineering analysis, system design, and professional measurement workflows.
Convert 1 uG to Mx/cm2.
So, 1 uG = 1.000000e-6 Mx/cm2.
One Microgauss (µG) equals 1.000000e-6 Maxwell per Square Centimeter (Mx/cm²)
Units of magnetic flux density are standardized measurements used to quantify magnetic field strength per unit area.
One Maxwell per Square Centimeter (Mx/cm²) equals 1.000000e-6 Microgauss (µG)
Units of magnetic flux density are standardized measurements used to quantify magnetic field strength per unit area.
How many Maxwell per Square Centimeter (Mx/cm²) are in 1 Microgauss (µG)?
1 Microgauss (µG) = 1.000000e-6 Maxwell per Square Centimeter (Mx/cm²).
How many Maxwell per Square Centimeter (Mx/cm²) are in one Microgauss (µG)?
One Microgauss (µG) equals 1.000000e-6 Maxwell per Square Centimeter (Mx/cm²).
How many Mx/cm2 are in one uG?
One uG equals 1.000000e-6 Mx/cm2.
What is the formula for converting Microgauss (µG) to Maxwell per Square Centimeter (Mx/cm²)?
Multiply the Microgauss (µG) value by 1.000000e-6.
Can I reverse the conversion?
Yes. 1 Maxwell per Square Centimeter (Mx/cm²) = 1.000000e+6 Microgauss (µG).
Is this Microgauss (µG) to Maxwell per Square Centimeter (Mx/cm²) conversion accurate for engineering use?
Yes. The conversion uses a standardized conversion factor suitable for engineering calculations, technical analysis, and professional reference.
Can this conversion be used for scientific or technical calculations?
Yes. This conversion is appropriate for scientific analysis, engineering calculations, simulations, and technical documentation where unit consistency is required.
By applying the conversion factor shown above, you can convert Microgauss (µG) to Maxwell per Square Centimeter (Mx/cm²) for electromagnetic modeling, motor analysis, and field strength comparison.
1 uG = 10⁻¹⁰ T
1 Microgauss (µG) = 10⁻¹⁰ Tesla (T)
One Microgauss (µG) equals 10⁻¹⁰ Tesla (T)
1 uG = 10⁻⁷ mT
1 Microgauss (µG) = 10⁻⁷ Millitesla (mT)
One Microgauss (µG) equals 10⁻⁷ Millitesla (mT)
1 uG = 0.0001 uT
1 Microgauss (µG) = 0.0001 Microtesla (µT)
One Microgauss (µG) equals 0.0001 Microtesla (µT)
1 uG = 0.1 nT
1 Microgauss (µG) = 0.1 Nanotesla (nT)
One Microgauss (µG) equals 0.1 Nanotesla (nT)
1 uG = 10⁻¹³ kT
1 Microgauss (µG) = 10⁻¹³ Kilotesla (kT)
One Microgauss (µG) equals 10⁻¹³ Kilotesla (kT)
1 uG = 10⁻¹⁰ Wb/m2
1 Microgauss (µG) = 10⁻¹⁰ Weber per Square Meter (Wb/m²)
One Microgauss (µG) equals 10⁻¹⁰ Weber per Square Meter (Wb/m²)
1 uG = 10⁻⁶ G
1 Microgauss (µG) = 10⁻⁶ Gauss (G)
One Microgauss (µG) equals 10⁻⁶ Gauss (G)
1 uG = 0.001 mG
1 Microgauss (µG) = 0.001 Milligauss (mG)
One Microgauss (µG) equals 0.001 Milligauss (mG)
1 uG = 10⁻⁶ Mx/cm2
1 Microgauss (µG) = 10⁻⁶ Maxwell per Square Centimeter (Mx/cm²)
One Microgauss (µG) equals 10⁻⁶ Maxwell per Square Centimeter (Mx/cm²)
1 uG = 2.24809 × 10⁻¹¹ lbf/(A·m2)
1 Microgauss (µG) = 2.24809 × 10⁻¹¹ Pound-force per Ampere per Square Meter (lbf/(A·m²))
One Microgauss (µG) equals 2.24809 × 10⁻¹¹ Pound-force per Ampere per Square Meter (lbf/(A·m²))
1 uG = 10⁻⁶ Oe_vac
1 Microgauss (µG) = 10⁻⁶ Oersted (vacuum) (Oe)
One Microgauss (µG) equals 10⁻⁶ Oersted (vacuum) (Oe)