Convert Kilotesla to Maxwell using the exact conversion factor. This page provides the formula, reference values, and practical context for engineering, technical calculations, and professional measurement use.
Kilotesla (kT) = Maxwell per Square Centimeter (Mx/cm²) × 1.000000e+7
To convert Kilotesla (kT) to Maxwell per Square Centimeter (Mx/cm²), multiply the value by 1.000000e+7. The conversion factor is based on standardized unit definitions and is suitable for engineering analysis, system design, and professional measurement workflows.
Convert 1 kT to Mx/cm2.
So, 1 kT = 1.000000e+7 Mx/cm2.
One Kilotesla (kT) equals 1.000000e+7 Maxwells per Square Centimeter (Mx/cm²)
Units of magnetic flux density are standardized measurements used to quantify magnetic field strength per unit area.
One Maxwell per Square Centimeter (Mx/cm²) equals 1.000000e+7 Kiloteslas (kT)
Units of magnetic flux density are standardized measurements used to quantify magnetic field strength per unit area.
How many Maxwell per Square Centimeter (Mx/cm²) are in 1 Kilotesla (kT)?
1 Kilotesla (kT) = 1.000000e+7 Maxwells per Square Centimeter (Mx/cm²).
How many Maxwell per Square Centimeter (Mx/cm²) are in one Kilotesla (kT)?
One Kilotesla (kT) equals 1.000000e+7 Maxwells per Square Centimeter (Mx/cm²).
How many Mx/cm2 are in one kT?
One kT equals 1.000000e+7 Mx/cm2.
What is the formula for converting Kilotesla (kT) to Maxwell per Square Centimeter (Mx/cm²)?
Multiply the Kilotesla (kT) value by 1.000000e+7.
Can I reverse the conversion?
Yes. 1 Maxwells per Square Centimeter (Mx/cm²) = 1.000000e-7 Kilotesla (kT).
Is this Kilotesla (kT) to Maxwell per Square Centimeter (Mx/cm²) conversion accurate for engineering use?
Yes. The conversion uses a standardized conversion factor suitable for engineering calculations, technical analysis, and professional reference.
Can this conversion be used for scientific or technical calculations?
Yes. This conversion is appropriate for scientific analysis, engineering calculations, simulations, and technical documentation where unit consistency is required.
By applying the conversion factor shown above, you can convert Kilotesla (kT) to Maxwell per Square Centimeter (Mx/cm²) for electromagnetic modeling, motor analysis, and field strength comparison.
1 kT = 1,000 T
1 Kilotesla (kT) = 1,000 Teslas (T)
One Kilotesla (kT) equals 1,000 Teslas (T)
1 kT = 10⁶ mT
1 Kilotesla (kT) = 10⁶ Milliteslas (mT)
One Kilotesla (kT) equals 10⁶ Milliteslas (mT)
1 kT = 10⁹ uT
1 Kilotesla (kT) = 10⁹ Microteslas (µT)
One Kilotesla (kT) equals 10⁹ Microteslas (µT)
1 kT = 10¹² nT
1 Kilotesla (kT) = 10¹² Nanoteslas (nT)
One Kilotesla (kT) equals 10¹² Nanoteslas (nT)
1 kT = 1,000 Wb/m2
1 Kilotesla (kT) = 1,000 Webers per Square Meter (Wb/m²)
One Kilotesla (kT) equals 1,000 Webers per Square Meter (Wb/m²)
1 kT = 10⁷ G
1 Kilotesla (kT) = 10⁷ Gauss (G)
One Kilotesla (kT) equals 10⁷ Gauss (G)
1 kT = 10¹⁰ mG
1 Kilotesla (kT) = 10¹⁰ Milligauss (mG)
One Kilotesla (kT) equals 10¹⁰ Milligauss (mG)
1 kT = 10¹³ uG
1 Kilotesla (kT) = 10¹³ Microgauss (µG)
One Kilotesla (kT) equals 10¹³ Microgauss (µG)
1 kT = 10⁷ Mx/cm2
1 Kilotesla (kT) = 10⁷ Maxwells per Square Centimeter (Mx/cm²)
One Kilotesla (kT) equals 10⁷ Maxwells per Square Centimeter (Mx/cm²)
1 kT = 224.80894 lbf/(A·m2)
1 Kilotesla (kT) = 224.80894 Pound-forces per Ampere per Square Meter (lbf/(A·m²))
One Kilotesla (kT) equals 224.80894 Pound-forces per Ampere per Square Meter (lbf/(A·m²))
1 kT = 10⁷ Oe_vac
1 Kilotesla (kT) = 10⁷ Oersteds (vacuum) (Oe)
One Kilotesla (kT) equals 10⁷ Oersteds (vacuum) (Oe)