Convert Revolution to Degree using the exact conversion factor. This page provides the formula, reference values, and practical context for engineering, technical calculations, and professional measurement use.
Revolution per Hour (rev/h) = Degree per Second (°/s) × 0.1
To convert Revolution per Hour (rev/h) to Degree per Second (°/s), multiply the value by 0.1. The conversion factor is based on standardized unit definitions and is suitable for engineering analysis, system design, and professional measurement workflows.
Convert 1 rev/h to deg/s.
So, 1 rev/h = 0.1 deg/s.
One Revolution per Hour (rev/h) equals 0.1 Degree per Second (°/s)
Units of angular velocity are standardized measurements used to quantify rotational speed in motors, machinery, and control systems.
One Degree per Second (°/s) equals 0.1 Revolution per Hour (rev/h)
Units of angular velocity are standardized measurements used to quantify rotational speed in motors, machinery, and control systems.
How many Degree per Second (°/s) are in 1 Revolution per Hour (rev/h)?
1 Revolution per Hour (rev/h) = 0.1 Degree per Second (°/s).
How many Degree per Second (°/s) are in one Revolution per Hour (rev/h)?
One Revolution per Hour (rev/h) equals 0.1 Degree per Second (°/s).
How many deg/s are in one rev/h?
One rev/h equals 0.1 deg/s.
What is the formula for converting Revolution per Hour (rev/h) to Degree per Second (°/s)?
Multiply the Revolution per Hour (rev/h) value by 0.1.
Can I reverse the conversion?
Yes. 1 Degree per Second (°/s) = 10 Revolutions per Hour (rev/h).
Is this Revolution per Hour (rev/h) to Degree per Second (°/s) conversion accurate for engineering use?
Yes. The conversion uses a standardized conversion factor suitable for engineering calculations, technical analysis, and professional reference.
Can this conversion be used for scientific or technical calculations?
Yes. This conversion is appropriate for scientific analysis, engineering calculations, simulations, and technical documentation where unit consistency is required.
By applying the conversion factor shown above, you can convert Revolution per Hour (rev/h) to Degree per Second (°/s) for motor speed analysis, rotating equipment evaluation, and control systems.
1 rev/h = 0.00175 rad/s
1 Revolution per Hour (rev/h) = 0.00175 Radian per Second (rad/s)
One Revolution per Hour (rev/h) equals 0.00175 Radian per Second (rad/s)
1 rev/h = 1.74533 mrad/s
1 Revolution per Hour (rev/h) = 1.74533 Milliradians per Second (mrad/s)
One Revolution per Hour (rev/h) equals 1.74533 Milliradians per Second (mrad/s)
1 rev/h = 0.1 deg/s
1 Revolution per Hour (rev/h) = 0.1 Degree per Second (°/s)
One Revolution per Hour (rev/h) equals 0.1 Degree per Second (°/s)
1 rev/h = 0.00028 rev/s
1 Revolution per Hour (rev/h) = 0.00028 Revolution per Second (rev/s)
One Revolution per Hour (rev/h) equals 0.00028 Revolution per Second (rev/s)
1 rev/h = 0.01667 rpm
1 Revolution per Hour (rev/h) = 0.01667 Revolution per Minute (RPM)
One Revolution per Hour (rev/h) equals 0.01667 Revolution per Minute (RPM)
1 rev/h = 0.00028 Hz
1 Revolution per Hour (rev/h) = 0.00028 Hertz (Hz)
One Revolution per Hour (rev/h) equals 0.00028 Hertz (Hz)
1 rev/h = 6 deg/min
1 Revolution per Hour (rev/h) = 6 Degrees per Minute (°/min)
One Revolution per Hour (rev/h) equals 6 Degrees per Minute (°/min)
1 rev/h = 0.11111 grad/s
1 Revolution per Hour (rev/h) = 0.11111 Gradian per Second (grad/s)
One Revolution per Hour (rev/h) equals 0.11111 Gradian per Second (grad/s)