Convert Poise to Dyne using the exact conversion factor. This page provides the formula, reference values, and practical context for engineering, technical calculations, and professional measurement use.
Poise (P) = Dyne Second per Square Centimeter (dyne·s/cm²) × 1
To convert Poise (P) to Dyne Second per Square Centimeter (dyne·s/cm²), multiply the value by 1. The conversion factor is based on standardized unit definitions and is suitable for engineering analysis, system design, and professional measurement workflows.
Convert 1 P to dyne.s/cm2.
So, 1 P = 1 dyne.s/cm2.
One Poise (P) equals 1 Dyne Second per Square Centimeter (dyne·s/cm²)
Units of dynamic viscosity are standardized measurements used to quantify a fluid’s resistance to flow under applied force.
One Dyne Second per Square Centimeter (dyne·s/cm²) equals 1 Poise (P)
Units of dynamic viscosity are standardized measurements used to quantify a fluid’s resistance to flow under applied force.
How many Dyne Second per Square Centimeter (dyne·s/cm²) are in 1 Poise (P)?
1 Poise (P) = 1 Dyne Second per Square Centimeter (dyne·s/cm²).
How many Dyne Second per Square Centimeter (dyne·s/cm²) are in one Poise (P)?
One Poise (P) equals 1 Dyne Second per Square Centimeter (dyne·s/cm²).
How many dyne.s/cm2 are in one P?
One P equals 1 dyne.s/cm2.
What is the formula for converting Poise (P) to Dyne Second per Square Centimeter (dyne·s/cm²)?
Multiply the Poise (P) value by 1.
Can I reverse the conversion?
Yes. 1 Dyne Second per Square Centimeter (dyne·s/cm²) = 1 Poise (P).
Is this Poise (P) to Dyne Second per Square Centimeter (dyne·s/cm²) conversion accurate for engineering use?
Yes. The conversion uses a standardized conversion factor suitable for engineering calculations, technical analysis, and professional reference.
Can this conversion be used for scientific or technical calculations?
Yes. This conversion is appropriate for scientific analysis, engineering calculations, simulations, and technical documentation where unit consistency is required.
By applying the conversion factor shown above, you can convert Poise (P) to Dyne Second per Square Centimeter (dyne·s/cm²) for lubrication analysis, fluid design, and process optimization.
1 P = 0.1 Pa.s
1 Poise (P) = 0.1 Pascal Second (Pa·s)
One Poise (P) equals 0.1 Pascal Second (Pa·s)
1 P = 100 mPa.s
1 Poise (P) = 100 Millipascal Seconds (mPa·s)
One Poise (P) equals 100 Millipascal Seconds (mPa·s)
1 P = 1 × 10⁵ uPa.s
1 Poise (P) = 1 × 10⁵ Micropascal Seconds (µPa·s)
One Poise (P) equals 1 × 10⁵ Micropascal Seconds (µPa·s)
1 P = 0.1 N.s/m2
1 Poise (P) = 0.1 Newton Second per Square Meter (N·s/m²)
One Poise (P) equals 0.1 Newton Second per Square Meter (N·s/m²)
1 P = 0.1 kg/m.s
1 Poise (P) = 0.1 Kilogram per Meter Second (kg/m·s)
One Poise (P) equals 0.1 Kilogram per Meter Second (kg/m·s)
1 P = 100 cP
1 Poise (P) = 100 Centipoises (cP)
One Poise (P) equals 100 Centipoises (cP)
1 P = 0.00209 lbf.s/ft2
1 Poise (P) = 0.00209 Pound-force Second per Square Foot (lbf·s/ft²)
One Poise (P) equals 0.00209 Pound-force Second per Square Foot (lbf·s/ft²)
1 P = 0.00001 lbf.s/in2
1 Poise (P) = 0.00001 Pound-force Second per Square Inch (lbf·s/in²)
One Poise (P) equals 0.00001 Pound-force Second per Square Inch (lbf·s/in²)
1 P = 0.00209 slug/ft.s
1 Poise (P) = 0.00209 Slug per Foot Second (slug/ft·s)
One Poise (P) equals 0.00209 Slug per Foot Second (slug/ft·s)
1 P = 1 dyne.s/cm2
1 Poise (P) = 1 Dyne Second per Square Centimeter (dyne·s/cm²)
One Poise (P) equals 1 Dyne Second per Square Centimeter (dyne·s/cm²)